Orbi RBR50 operates on tri-bands. Therefore, users get uninterrupted, seamless and dependable connectivity for their devices. But to fetch this experience, carrying out errorless Orbi RBR50 setup is mandatory. So if you are juggling with the setup process, then do not worry. As in this post we’ll not just be sharing the complete setup steps but we will also share the product features alongside its reset process. For the Orbi RBR50 setup, we’ll use the trusted web browser method. So let’s move straight to the main point.

Orbi RBR50 Features

• The device uses tri-bands for its working. It effectively covers a carpet area of 2000 sq.ft. One Orbi router can easily handle three satellites. Each satellite can again provide coverage to 2000 sq.ft. area. Therefore with Orbi RBR50 setup you get to expand the wifi coverage area as and when required.
• Moving further, the device features six high performance antennas and high-power amplifiers as well. So your networking experience with RBR50 will be nothing short of perfect.
• Next up, with the availability of MU-MIMO technology, RBR50 users can easily link a number of devices at the same time to the Orbi and stream anything.
• Moreover, the Orbi RBR50 setup also features beamforming technology. This means even if you are moving from one room of your abode to the other, your device will automatically fetch the signals from the nearby orbi satellite.
• Additionally, for linking your devices directly to the RBR50 network, you get not one, not two but a total of four Gigabit ethernet ports.

Now as you are familiar with the feature set of Orbi RBR50 setup, let’s start with the unboxing and then follow up with the installation steps.

Included Items In The Orbi RBR50 Package 

As you unbox the Orbi RBR50 package, you’ll find these items:

• One Orbi (RBR50) router.
• One 6.5ft Ethernet wire.
• One 12V/3.5A power adapter.
• Lastly, a quick user manual.

Now apart from these items, for the Orbi RBR50 setup, you need:

• A smart gadget of your choice. It can be a laptop, your computer, iPad or your cell phone.
• Thereafter, a modem with internet plan.
• Lastly, a power socket that offers consistent power supply.

Let’s Begin The Configuration

The setup steps are quite simple. Thus, you won’t require more than 10 minutes to wrap it up. So let’s initiate the steps:

✓ Plot the RBR50 thoughtfully in your abode. Position it centrally, away from electronic and metal devices. Common devices that can create a ruckuss are oven, refrigerator, cordless phones, CCTV cameras, baby monitors, bluetooth devices as well as the aluminium doors. Thereafter, make sure the plotting area offers proper ventilation. Also place the RBR50 on a high surface for better signal transmission.

✓ Before turning on the Orbi RBR50 setup, unplug the modem as well as the router if you have any. Now pick the ethernet wire. Link it to the modem. Then to the RBR50. After that grab the power adapter. Link it to the RBR50’s power inlet. and then to the available power board. Switch on. Also put back the modem’s power adapter. As you activate the Orbi, you’ll see a ring LED glowing white. It is an indication to move to the next Orbi RBR50 setup step.

✓ Herein, pick your chosen smart device. Activate its wifi. Find a similar name in the network list as you see on your RBR50’s bottom panel. Tap on it to get connected.

✓ Now, on the networked device, open the internet browser. For errorless setup, we recommend selecting between chrome, internet explorer, firefox, edge and safari.

✓ Head to the address bar. In it fill up orbilogin.com. Press Enter. Thereafter, fill up the username alongside the security key.

• Username: admin
• Password: password.

✓ Finally, wrap up the Orbi RBR50 setup by following the prompts shown on the screen. When the setup is done errorlessly, the ring LED won’t show white light.

Resetting Orbi

Reset is something that should be avoided unless and until it becomes mandatory. As frequently doing so can affect the internal hardware of your RBR50. So in case you forget the login key or there is some major technical glitch that isn’t resolving or when you decide to give away your device only then reset should be done. So if you are also facing something of similar nature then here are the resetting steps:

• Ensure the RBR50 is powered on.
• Now, nudge the reset button. Do not let go of it, till you watch the ring LED blinking.
• As the light begins to flicker, release the reset knob and wait for the Orbi to show up stable light.
• Finally, you can set up the Orbi RBR50 all over again.

For any other queries or assistance, feel free to connect directly with our team of experts. You can reach out to us conveniently through a phone call for immediate support, or use the live chat option available on our website for quick and interactive help. Our professionals are always ready to guide you through any issues or setup needs.