BrosTrend AX3000 Extender Setup Guide

An AX3000 WiFi 6 range extender from BrosTrend is capable of transmitting data at 3000Mbps speeds. It supports dual-band frequency and has high power signal amplifiers that help it to do the WiFi signal amplification job more effectively. You can set it up with the help of the WPS method or by accessing its Graphical User Interface on a computer. Walk through this BrosTrend WiFi 6 AX3000 extender setup guide to learn more.

How to Complete BrosTrend WiFi 6 AX3000 Extender Setup via WPS?

The BrosTrend WiFi extender setup for the AX3000 WiFi 6 extender via WPS can be completed in the following way. But, you should be very sure that your main router is in a working state.

• Plug the WiFi 6 extender into the same room where your router is serving you.
• Switch on the BrosTrend extender now and wait until the LED indicator blinks slowly.
• Look for the WPS button on your router and press it.
• The WPS light status on your router should have changed by now.
• Within 2 minutes, you have to press the AX3000 extender’s WPS button which is located on its side panel.
• The LED indicator will turn solid blue, yellow, or red which means that the connection between your extender and the router is successful.
• The BrosTrend WiFi 6 AX3000 extender setup via WPS completes.

In this way, you can set up your BrosTrend AX3000 extender using the WPS method. Just in case, the LED indicator on your range extender does not turn solid, we recommend you reset the extender and set it up once again. But, this time try the web GUI method. The instructions are given in the next section.

How to Set Up BrosTrend WiFi 6 AX3000 Extender via Web GUI?

In the web GUI method, you will need a computer or a laptop to set up the extender. However, a mobile phone will also serve the same purpose. Check out the instructions given below to learn how to install the BrosTrend extender via the web GUI.

• Power up the BrosTrend AX3000 after plugging it into the room where you have placed the host router.
• If the indicator LED on your extender blinks red, move to the next step.
• Switch on the computer and open its network list.
• Look for the network named BrosTrend_EXT and connect to it.
• You don’t need any WiFi password to connect to this network.
• As soon as you join the BrosTrend_EXT network, you will be redirected to the Quick Setup page.
• In case, the setup page does not show up, you are suggested to go to brostrendwifi.com on a web browser.
• You will now see the Set Login Password window.
• Here, you will be prompted to set a login password for the extender in order to improve network security.
• Click Done after that.
• Choose the Working mode – Extender Mode/WiFi to Ethernet Adapter Mode.
• Click Next after that and select the existing network that you want to extend.
• Input the WiFi password of that network.
• Customize the network name and password of your BrosTrend WiFi 6 AX3000 extender and click Extend.
• The LED indicator will turn solid which is a sign that the setup process is completed.
• Now, relocate the extender and place it in at a location where you are experiencing weak WiFi connectivity.

The Bottom Line

Here, ends our BrosTrend WiFi 6 AX3000 extender setup guide. We hope that after taking a walk through the instructions given here and following them carefully, you will be able to set up your BrosTrend device without any hassle.