Wifi dead zones are frustrating. It ruins the overall networking experience. The Wavlink AC1200 extender solves this problem. It is a dual band wifi range extender that joins hands with the router and thereafter it strengthens and extends the signals to a much wider area. Completing the Wavlink AC1200 setup is easy. Thus you don’t need to be a tech expert. This guide provides you with a clear step-by-step process. Within a couple of minutes you’ll be online quickly. We’ll be listing two different setup methods. One is direct which is done with a simple push of the WPS button. Whereas the other one is on a more detailed side and is done using the web browser. A proper errorless Wavlink AC1200 setup means no more wifi dead zones, no lag or buffering, no slow wifi speeds or intermittent connectivity.

Method 1: WPS Button Setup (Easiest Way)

This is the fastest setup method. It works only if your router has a WPS button.

Power On The AC1200

Firstly bring the AC1200 extender to the same area as the router. Now locate the electrical outlet which is closest to the router. Plug the extender into it. Supply adequate power and let it get activated. Once you notice a stable light on the extender you can move forward.
Activate WPS On Router
Now first ensure your router is active. After that locate the WPS Button on the router. Then press it down and hold it for a second. This activates the WPS function.

Activate WPS On AC1200

Now within two minutes, press the WPS button on the Wavlink AC1200 device. Hold it until the WPS LED starts flashing.
Finally you just need to hold on for a moment and then the sync will complete. With this the smart light will turn stable green. This indicates a successful Wavlink AC1200 setup.

Relocate The Extender

As the setup is done successfully you can now relocate the wifi signal repeater. Deploy it in the middle of the router and the area where you require extended signals.

Method 2: Web Browser Setup

Use this method if your router lacks a WPS button. This process gives you more control over the Wavlink AC1200 setup. This setup method can be little time consuming but still it is easy even for the non tech individuals.

Initial Connection

First of all start with the basics which is activating the AC1200 extender. So activate the extender nearby to the router and let its power light get stabilized.

Connect To Extender

Up next go and grab your smart gadget. It can be anything from laptop to cellphone and iPad. Then go to the device’s wifi page. From their toggle wifi. Now connect to the AC1200’s default network. It is usually listed as Wavlink-AC. Whereas you can fetch the exact credentials from the extender’s product label.

Users who want reliability and better stability during the remaining Wavlink AC1200 setup can connect to the extender via ethernet cable.

Access The Web Page

After the pairing is done, open the internet browser. For Wavlink AC1200 installation you can use any browser from Chrome, internet explorer to safari and edge. Then move to the browser’s URL blank. In this blank type wifi.wavlink.com or you can also type the default IP address. It is http://192.168.10.1. Press enter and this will give you access to the login page.

Login

Now fill in the login password. By default it is “admin” in lower letter case. Also select the language and with that tap on Login.

Select Mode And Wrap Up Setup

After successful login you can choose the mode in which you want to use the Wavlink AC1200. So for eliminating wifi dead zones you have to select the repeater mode. With this your AC1200 extender will start looking for the available nearby networks. After scanning the list will appear on your screen. So select your router’s SSID. Thereafter fill up the password. This is key for the Wavlink AC1200 setup. Then you get an option to personalize network details. Do so for security reasons and then click on Apply/Save. The extender will then reboot itself and once it re-starts it will broadcast the new network that you just created.

So finally, after relocation of the extender you can pair your device to the new network and check for the connectivity.
The goal is to receive a strong signal from the router while effectively extending coverage to the weak area. So for this you have to deploy the extender in between the router and the wifi dead spot. For best experience keep the extender away from all sorts of metal and electronic items.

If you have any queries regarding the Wavlink AC1200 setup then do not hesitate to connect with the professional experts.